Touch screen 10"

TACTÍL TABLET 10";";"TÁCTIL GENÉRICA TABLET

Technical Characteristics:

• Display: 10 inches
• Operating System: Android
• Resolution: 1280 by 800 pixels
• Processor: Quad-Core 1.3 GHz
• Memory: 2GB RAM

Instructions for Replacing Tactíl Tablet 10";";"Táctil Genérica Tablet

Please follow these steps to replace your Tactíl tablet:

• Turn off the tablet and disconnect any connected accessories or cables.
• Using a quality tool kit, gently pry open the back cover of the device. Start from the corners, then work your way around the tablet, but be careful to not apply too much force.
• Once the back cover is removed, locate the battery connector on the motherboard. Disconnect the battery from the motherboard by gently lifting the connector.
• After the battery is disconnected, locate the display flex cable connector on the motherboard. Do the same as before and gently disconnect it.
• You are now ready to remove the entire display assembly from the tablet body. Do this with careful and steady hands.
• Now, take your new display and connect it to the motherboard using the display flex cable. Gently press the connector to ensure a secure connection.
• Reconnect the battery, making sure the connector is well positioned and secure.
• Finally, reinstall the back cover, making sure all clips lock into place properly.
• Switch on the tablet to ensure everything is working correctly.

Please note that these instructions are a general guide and may slightly differ depending on your specific model and layout of components.