Samsung Galaxy Tab A WIFI T510 spare parts

    There are 24 products.

    Samsung Galaxy Tab A WIFI T510 Repuestos Specifications

    The Samsung Galaxy Tab A WIFI T510 repuestos is equipped with impressive features making it a top choice in the market. Below are its technical specifications:

    • Screen type: TFT capacitive touchscreen, 16M colors
    • Screen size: 10.1 inches, 295.8 cm2 (~80.7% screen-to-body ratio)
    • Resolution: ...

    Samsung Galaxy Tab A WIFI T510 Repuestos Specifications

    The Samsung Galaxy Tab A WIFI T510 repuestos is equipped with impressive features making it a top choice in the market. Below are its technical specifications:

    • Screen type: TFT capacitive touchscreen, 16M colors
    • Screen size: 10.1 inches, 295.8 cm2 (~80.7% screen-to-body ratio)
    • Resolution: 1200 x 1920 pixels, 16:10 ratio (~224 ppi density)
    • Internal Storage: 32/64/128GB 2GB RAM, 32/64/128GB 3GB RAM
    • Main Camera: Single - 8 MP, AF, f/2.0
    • Selfie Camera: Single - 2 MP, f/2.2
    • Battery: Non-removable Li-Po 6150 mAh battery

    Instructions to Replace Samsung Galaxy Tab A WIFI T510 Repuestos

    Below are the detailed instructions to replace Samsung Galaxy Tab A WIFI T510 repuestos:

    Tools Required

    • Plastic opening tools
    • Phillips #00 Screwdriver
    • Spudger
    • Tweezers

    Replacement Procedure

    Follow the steps provided below meticulously to avoid additional harm on the device.

    Step 1: Power off the Samsung Galaxy Tab A and lay it screen-down.

    Step 2: Using the plastic opening tool, gently pry on the edges to remove the back panel. Ensure that all the clips are detached before lifting the cover.

    Step 3: Once the back cover is removed, locate the battery connector. Unplug it by using a spudger.

    Step 4: Remove the screws securing the battery using a Phillips #00 screwdriver, then use the spudger to lift the battery out.

    Step 5: To replace the battery, seat the new battery in place and secure it with the screws.

    Step 6: Plug the battery connector into the socket and replace the back panel, ensuring all clips click back into place.

    Step 7: Power on the device to ensure everything is working properly.

    Note: This is a standard procedure and must be adopted with care. In case of any inability, get help from authorized personnel.

    Troubleshoot

    If any issue arises, refer to the device’s manual, professional technician, or authorized repair centers.

    Less
    More
    Showing 1 - 24 of 24 items