Samsung Galaxy Tab S5E SM-T720 spare parts

    There are 18 products.

    Samsung Galaxy Tab S5E SM-T720 Technical Characteristics

    The Samsung Galaxy Tab S5E SM-T720 is an advanced android tablet offering top-tier performance and sophisticated aesthetics.

    • Display: 10.5 inches Super AMOLED, 1600 x 2560 pixels
    • Processor: Octa-core (2x2.0 GHz 360 Gold & 6x1.7 GHz Kryo 360 Silver)
    • RAM: 4/6 GB RAM
    • Storage: 64/12...

    Samsung Galaxy Tab S5E SM-T720 Technical Characteristics

    The Samsung Galaxy Tab S5E SM-T720 is an advanced android tablet offering top-tier performance and sophisticated aesthetics.

    • Display: 10.5 inches Super AMOLED, 1600 x 2560 pixels
    • Processor: Octa-core (2x2.0 GHz 360 Gold & 6x1.7 GHz Kryo 360 Silver)
    • RAM: 4/6 GB RAM
    • Storage: 64/128 GB, expandable up to 512 GB
    • Camera: 13 MP, f/2.0, 26mm (wide), 1/3.4", 1.0µm
    • Battery: Non-removable Li-Po 7040 mAh battery
    • Operating System: Android 9.0 (Pie), upgradable to Android 10

    Instructions on How to Replace Samsung Galaxy Tab S5E SM-T720 Components

    Preparation

    • Firstly, ensure that your device is powered off and disconnected from any power source.
    • Prepare a clean, flat surface to work on. This will prevent any parts from being lost or damaged.

    Removing the Back Cover

    • Use a heat gun or a hairdryer to warm up the edges of the back cover. This will loose the adhesive that holds it on.
    • Insert a plastic opening tool or a guitar pick into the gap between the cover and the tablet frame, slowly pry up the back cover.
    • Take your time and apply firm, constant force. Do not try to force or you risk breaking the cover.

    Replacing the Battery

    • After removing the back cover, locate the battery.
    • Disconnect the battery connector from the motherboard.
    • Use a spudger to carefully pry the battery up and remove it. Be careful not to puncture or bend the battery.
    • Before installing the new battery, clean the adhesives and ensure that the area is free from dust.
    • Place the new battery in the phone. Make sure it is correctly aligned.
    • Reconnect the battery connector to the motherboard.

    Finishing Up

    • Finally, replace the back cover on the tablet frame and press it down firmly to ensure proper adhesion.
    • Power on your device and check if everything is working correctly.

    Note: While replacing components, be sure to handle parts and tools with care – some components may be fragile. If you're not confidently sure about the procedure, consider professional assistance.

    Less
    More
    Showing 1 - 18 of 18 items