Doogee T30 Pro spare parts

    There are 26 products.

    Technical Characteristics of Doogee T30 Pro Repuestos

    The Doogee T30 Pro Repuestos embodies a combination of high-quality components essential for the smartphone's optimal performance. Below are the technical specifications of the device's parts.

    • Screen: The device comes with a 6.52-inch HD+ IPS display, offering a resolution of 720 x 1600 pix...

    Technical Characteristics of Doogee T30 Pro Repuestos

    The Doogee T30 Pro Repuestos embodies a combination of high-quality components essential for the smartphone's optimal performance. Below are the technical specifications of the device's parts.

    • Screen: The device comes with a 6.52-inch HD+ IPS display, offering a resolution of 720 x 1600 pixels for vivid and detailed visuals.
    • Battery: It's equipped with a 5580mAh battery, providing long-lasting usage with reduced charging times.
    • Processor: Powered by an Octa-core MT6762V/WD processor, the device ensures smooth multitasking and enhanced performance.
    • Memory: With a memory combination of 4GB RAM and 64GB ROM, it offers ample storage space and efficient functioning.

    Instructions to replace Doogee T30 Pro Repuestos

    Before starting, ensure to power off your Doogee T30 Pro and remove the SIM card and SD card if available. Keep all necessary tools (pentalobe screwdriver, spudger, and tweezers) handy.

    Instructions

    Follow the instructions step by step to swap the parts of your device.

    • Step 1: Remove the back cover using a heat gun and a suction cup to soften and lift the adhesive respectively.
    • Step 2: After opening the cover, locate the battery connector and disconnect it using a spudger.
    • Step 3: Proceed to disconnect and remove the vibrator using the spudger and tweezers respectively.
    • Step 4: Once the vibrator is removed, disconnect the antenna cables and the front camera connector.
    • Step 5: Remove the screws holding the motherboard in place. Lift out the motherboard carefully using a spudger.
    • Step 6: The screen can now be removed. Use the heat gun to soften the adhesive holding the screen and carefully pull it apart from the body of the phone.
    • Step 7: Apply new adhesive and set the new screen in place. Follow the above steps in reverse order to reassemble the phone.

    Note: Proceed with caution during the process as any damage to the cables or connectors can cause malfunctions. If unsure about the procedure, it's recommended to go to a professional repair service to avoid any accidental damages.

    Less
    More
    Showing 1 - 26 of 26 items