Oukitel RT3 spare parts

Technical Characteristics of Oukitel RT3 Repuestos

The Oukitel RT3 is a notable smartphone known for its resilient performance capabilities. The key technical characteristics of its components (repuestos) include:

• Screen: A capacitive touchscreen with a size of 5.7 inches and resolution of 720 x 1440 pixels.
• Battery: A non-removable Li-Po battery with a capacity of 3000mAh.
• Memory: The device comes with 2GB of RAM and 32 GB of internal storage, expandable up to 128 GB with an SD card.
• Camera: The rear camera is 13MP and the front camera is 5MP.
• Processor: A MediaTek MT6580 chipset powers the device, ensuring smooth operation.

Instructions for Replacing Oukitel RT3 Repuestos

Pre-requisite

Ensure the device is powered off before starting to avoid any possible electrical mishap.

Replacing the Screen

• Use a heat gun to carefully loosen the adhesive under the screen.
• Use a suction cup and pry tool to separate the screen from the body.
• Disconnect the screen connector from the motherboard.
• Attach the new screen, ensuring the connectors line up accurately.
• Apply a suitable screen adhesive to secure the new screen.

Replacing the Battery

• Remove the back cover by heating the edges and using a pry tool.
• Remove the screw securing the battery connector and disconnect the battery connector from the motherboard.
• Lift the battery from the adhesive securing it to the body.
• Place the new battery and connect it to the motherboard. Screw it back in place.
• Attach the back cover using suitable adhesive.

Replacing the Memory Card

• Locate the memory card slot on the side of the device.
• Using a pin-eject tool, eject the memory card tray by pushing into the small hole.
• Remove the old memory card and replace it with the new one.
• Slide the tray back into the slot.

Note: Please ensure to go through the device manual or take professional consultation if necessary. The process requires utmost care and precision.