TCL Tab 8 4G 9048S 9049 spare parts

TCL Tab 8 4G 9048S 9049 Repuestos Specifications

The TCL Tab 8 4G 9048S 9049, a member of the TCL tablet line-up, offers several key technical characteristics. These can be found broken down as follows:

• Display: 8-inch LCD Capacitive touchscreen with resolution 800 x 1280 pixels
• Chipset: Mediatek MT8768
• Memory:32GB internal storage expandable via microSD, 2GB RAM
• Battery: 4080mAh non-removable battery
• Camera: Rear - 8MP; Front - 5MP
• Operating System:Android 10

Instructions for Replacing TCL Tab 8 4G 9048S 9049 Repuestos

Replacing the parts for the TCL Tab 8 requires careful attention. Please follow the steps below as close as possible

TOOLS REQUIRED:

• Phillips #00 Screwdriver
• Spudger
• Plastic Opening Tools

Step 1: Opening the device

Turn off the tablet and remove SIM and memory card if available. Using a plastic opening tool, carefully detach the back cover from the display assembly.

Step 2: Removing the battery

Locate the battery connector and using a spudger gently detach the connector. Remove all screws securing the battery using phillips #00 screwdriver and gently lift the battery out of the device.

Note: Be extra careful not to puncture the battery.

Step 3: Replacing the component

Depending on the component to be replaced, locate the component and carefully remove it from its socket. Replace with the new part and secure firmly.

Step 4: Reassembling the device

Reconnect the battery and attach all connectors and cables back to their hardware. Carefully place the back cover and press gently until it clicks into place. Turn the device on to test functionality.

Note: These instructions are general and can be applied to most replacements. However, changing certain parts like the display screen or the motherboard may require additional steps. Less