Ulefone Tab a8 Spare parts

    There are 25 products.

    Ulefone Tab A8 Repuestos Technical Characteristics

    The Ulefone Tab A8 Repuestos is equipped with a range of high-quality components that improve user experience and device longevity. The specs are as follows:

    • Display: 7.0”, IPS, with 1280x800 pixels resolution.
    • Processor: MediaTek MT8768AE, an octa-core processor with maximum clocking speed ...

    Ulefone Tab A8 Repuestos Technical Characteristics

    The Ulefone Tab A8 Repuestos is equipped with a range of high-quality components that improve user experience and device longevity. The specs are as follows:

    • Display: 7.0”, IPS, with 1280x800 pixels resolution.
    • Processor: MediaTek MT8768AE, an octa-core processor with maximum clocking speed of 2.0GHz.
    • Memory: Comes with 4GB RAM and 64 GB built-in storage, expandable up to 1TB with a MicroSD card.
    • Camera: Features a 5.0 Megapixel rear camera and a 2 Megapixel front camera for video calling and selfies.
    • Battery: 5500mAh that supports 5V/2A fast charging.
    • Connectivity: Supports dual-band WiFi, Bluetooth 5.0 and 4G LTE networks.

    Instructions on How to Replace Ulefone Tab A8 Repuestos

    Tools Required

    • Small Phillips Screwdriver
    • Suction Cup
    • Opening Picks
    • Spudger

    Steps to Replace Ulefone Tab A8 Repuestos

    Please note that this process requires a steady hand and patience, as forcing or rushing can result in permanent device damage.

    • Start by turning off your device. Remove the SIM card tray.
    • Use a heat gun or hairdryer to slightly warm up the back cover edges, then attach the suction cup at the bottom.
    • Carefully lift the back cover using suction cup and insert the opening pick.
    • Move the pick around the edges of the device to release the adhesive. This will separate the back cover from the device.
    • Once inside, remove all the screws using the Phillips Screwdriver.
    • Carefully disconnect the battery connector using the Spudger tool.
    • Identify the part that needs to be replaced (camera, screen, battery, etc.). After identifying the faulty part, carefully remove it.
    • Place the new repuestos where the old one was removed and ensure that it is connected properly.
    • Reconnect the battery and tighten all the screws.
    • Carefully place the back cover back and apply gentle pressure around the edges until the clips click into place.
    • Switch on your device and ensure everything is operating as expected.

    Note

    If you're inexperienced with device repair, it's often a safer choice to use the services of a professional to avoid causing further damage.

    Less
    More
    Showing 1 - 25 of 25 items