Sony Xperia E4 E2104 repuestos

Sony Xperia E4 E2104 Replacement Parts Technical Characteristics

Sony Xperia E4 E2104 is a mid-range smartphone and the available replacement parts include:

• LCD Display – 5.0 inches, 540 x 960 pixels resolution
• Battery – Li-Ion 2300 mAh
• Front Camera Module – 2 MP
• Rear Camera Module – 5 MP, LED flash
• Charging Port – Micro-USB 2.0
• Power and Volume Buttons – Standard replacements

Instructions for Replacing Sony Xperia E4 E2104 Parts

Please follow these detailed steps for replacing components on your Sony Xperia E4 E2104.

1. Replacing the LCD Display

Tools Required: Phillips screwdriver, plastic spudger, tweezers.

• 1. Power off the device.
• 2. Use the Phillips screwdriver to remove the screws from the back cover.
• 3. Carefully pry off the back cover using the plastic spudger.
• 4. Disconnect the battery and then unplug the LCD connector using tweezers.
• 5. Gently remove the old LCD display and replace it with the new one.
• 6. Reconnect the LCD connector and the battery.
• 7. Reassemble the back cover and fasten the screws.

2. Replacing the Battery

Tools Required: Phillips screwdriver, plastic spudger.

• 1. Power off the device.
• 2. Remove the screws on the back cover using the Phillips screwdriver.
• 3. Use a plastic spudger to pry off the back cover carefully.
• 4. Disconnect the battery connector.
• 5. Remove the old battery and insert the new one.
• 6. Reconnect the battery connector.
• 7. Place the back cover back and secure it with screws.

3. Replacing the Front Camera Module

Tools Required: Phillips screwdriver, plastic spudger, tweezers.

• 1. Power off the device.
• 2. Remove the back cover screws and carefully pry off the cover.
• 3. Locate and disconnect the front camera module using tweezers.
• 4. Carefully remove the old camera module.
• 5. Place the new front camera module in position and reconnect it.
• 6. Reassemble the back cover and secure it with screws.

4. Replacing the Rear Camera Module

Tools Required: Phillips screwdriver, plastic spudger, tweezers.

• 1. Power off the device.
• 2. Remove the screws from the back cover with the Phillips screwdriver.
• 3. Gently pry off the back cover using a plastic spudger.
• 4. Locate the rear camera module and disconnect it with tweezers.
• 5. Remove the old rear camera module.
• 6. Install the new rear camera module and reconnect it.
• 7. Place the back cover back on and secure with screws.

5. Replacing the Charging Port

Tools Required: Phillips screwdriver, plastic spudger, soldering kit (optional).

• 1. Power off the device.
• 2. Remove the screws holding the back cover using a Phillips screwdriver.
• 3. Carefully pry off the back cover with a plastic spudger.
• 4. Locate and disconnect the charging port assembly.
• 5. If soldering is required, desolder the old charging port and solder in the new one.
• 6. Connect the new charging port assembly.
• 7. Reassemble the back cover and secure with screws.

6. Replacing Power and Volume Buttons

Tools Required: Phillips screwdriver, plastic spudger, tweezers.

• 1. Power off the device.
• 2. Remove the screws on the back cover with the Phillips screwdriver.
• 3. Carefully pry off the back cover using a plastic spudger.
• 4. Locate and gently disconnect the flex cable for the buttons.
• 5. Remove the old buttons and insert the new ones.
• 6. Reconnect the flex cable.
• 7. Place the back cover back on and secure it with screws.