Battery BLP745 4010mAh by OnePlus 7T Pro HD1913 HD1910 1031100012 Service Pack

The BLP745 battery for OnePlus 7T Pro HD1910, HD1911 and HD1913, also compatible with OnePlus 7T Pro 5G McLaren Edition HD1925, is a Service Pack replacement identified by part number 1031100012. It features a rated capacity of 4010 mAh, a typical capacity of 4085 mAh and a nominal voltage of 3.87 V. It is designed to replace the internal battery when it experiences reduced battery life, charging difficulties or unexpected shutdowns related to deterioration. Its specific format allows professional repairs to be carried out while maintaining the electrical characteristics corresponding to these devices.

- Brand:OnePlus.

- Battery reference:BLP745.

- Part number:1031100012.

- Quality:Service Pack.

- Component type:Rechargeable internal battery.

- Technology:Lithium-ion Polymer (Li-ion Polymer).

- Rated capacity:4010 mAh.

- Typical capacity:4085 mAh.

- Nominal voltage:3.87 V.

- Rated energy:15.51 Wh.

- Typical energy:15.80 Wh.

- OnePlus 7T Pro Chinese version:HD1910.

- OnePlus 7T Pro Indian version:HD1911.

- OnePlus 7T Pro European/international version:HD1913.

- OnePlus 7T Pro 5G McLaren Edition US version:HD1925.

The BLP745 Service Pack battery allows the power supply module of the OnePlus 7T Pro to be replaced while maintaining the specifications corresponding to this replacement component. Its rated capacity of 4010 mAh and typical capacity of 4085 mAh provide a solution for devices affected by battery deterioration, reduced battery life or shutdowns associated with power supply problems.

Part number 1031100012 facilitates component identification and management in professional catalogues. Its compatibility with versions HD1910, HD1911, HD1913 and HD1925 allows the BLP745 model to be used across different regional variants of the device, including the 5G McLaren Edition. Its internal format facilitates replacement of the deteriorated component while preserving the battery configuration intended for these devices.

- Completely power off the device and use electrostatic discharge (ESD) protection during the repair.

- Disconnect the existing battery before working on the internal components of the device.

- Carefully remove the previous battery and clean any adhesive residue remaining in its housing.

- Position the new BLP745 battery in its corresponding location, using suitable adhesive for secure attachment.

- Align the power flex cable and connect it without forcing the contacts or applying excessive pressure to the connector.

- Check device startup, battery recognition and charging operation before final closure.

- Replace the back cover adhesive and check its correct attachment and sealing.

- After installation, perform a full charge and check how the battery percentage changes during normal operation.