Battery BLP899 by OnePlus 10 Pro 5G NE2210 NE2211 NE2213 NE2215 NE2217 1031100050 Service Pack

The BLP899 battery for OnePlus 10 Pro 5G NE2210, NE2211, NE2213, NE2215 and NE2217 is a Service Pack replacement part identified by reference 1031100050. It consists of two lithium-polymer cells with a typical capacity of 2500 mAh each, a configuration corresponding to the device's equivalent advertised capacity of 5000 mAh. Replacing this battery helps restore battery life when the installed unit shows wear, rapid discharge or shutdowns associated with deterioration. This component is intended for professional repairs requiring the same form factor, internal connection and electrical characteristics as the BLP899 battery.

- Brand: OnePlus.

- Battery model: BLP899.

- Part number: 1031100050.

- Quality: Service Pack.

- Component type: Internal rechargeable lithium-ion polymer battery (Li-ion Polymer).

- Configuration: Dual-cell system.

- Typical capacity: 2500 mAh per cell, equivalent to 5000 mAh in the device's advertised capacity.

- Minimum capacity: 2440 mAh per cell.

- Nominal voltage: 7.74 V across the two-cell assembly.

- Typical energy: 19.35 Wh.

- Compatible models: OnePlus 10 Pro 5G NE2210, NE2211, NE2213, NE2215 and NE2217.

The BLP899 Service Pack battery maintains the dual-cell configuration used in the OnePlus 10 Pro 5G, with a typical capacity of 2500 mAh at 7.74 V for the complete assembly, equivalent to the commercially advertised 5000 mAh. Replacing an ageing battery helps restore battery life lost through wear and improve operating stability when the cause of the issue is related to accumulated charging cycles. Identification through the BLP899 code and reference 1031100050 makes it easier to select the correct part and avoids confusion with batteries designed for other models. Service Pack quality provides a replacement solution matching the manufacturer's power specifications, particularly suitable for technical repair services and professional maintenance.

- Completely power off the device and disconnect the battery before working on internal components.

- Use appropriate tools and electrostatic discharge (ESD) protection during disassembly.

- Remove the previous battery following the device's disassembly procedure and clean any adhesive residue from the mounting surface.

- Place the new BLP899 battery in its housing and correctly align the connector without applying excessive pressure to the flex cable.

- Renew the fixing adhesives where appropriate and check that the battery is correctly seated.

- Before final closure, check device startup, battery recognition and charging functionality.

- Perform a full charge after installation and verify that the battery percentage changes correctly during subsequent normal usage cycles.