Battery BLP905 by OPPO Reno7 Pro 5G CPH2293 PFDM00 4500 mAh premium quality

BLP905 Battery for OPPO Reno7 Pro 5G CPH2293 PFDM00 4500 mAh Premium Quality

BLP905 battery for OPPO Reno7 Pro 5G, technical models CPH2293 and PFDM00, in premium quality, designed to restore the autonomy and power stability of the device. This replacement part allows a deteriorated, swollen or significantly reduced-performance battery to be replaced. Its internal dual-cell configuration, flex cable and connector are intended for the verified international and Chinese Reno7 Pro 5G variants. Intended for professional installation and complete testing before closing the device.

The BLP905 battery has a technical capacity of 2250 mAh at 7.74 V, equivalent to a combined commercial capacity of 4500 mAh at approximately 3.87 V. Its energy rating is 17.41 Wh and it uses rechargeable lithium-ion polymer technology. The dual-cell structure allows the fast charging system of the device to be managed and maintains a stable power supply during calls, browsing, multimedia playback and intensive application use.

Premium quality provides electrical stability, uniform performance during charging cycles and a precise fit inside the internal compartment. It is suitable for repairing devices showing accelerated discharge, unexpected shutdowns, irregular charging, overheating caused by a degraded battery or a significant reduction in operating time. The BLP905 reference, voltage, flex cable, connector and contact position must match the removed battery.

Available for immediate shipping from Spain.

Installation advice

Completely disconnect the device before starting the repair.

Use ESD protection and suitable tools to handle the internal components.

Do not bend, pierce or excessively heat either cell.

Compare the BLP905 reference, voltage, flex cable and connector with the removed battery.

Perform a power-on and charging test before permanently securing the battery.

Check that the charge percentage, temperature and power consumption progress normally.

Replace the internal adhesives and completely remove the previous residue.

Complete several normal charging cycles to stabilise the capacity reading.

Notice

This battery is verified for the OPPO Reno7 Pro 5G CPH2293 and PFDM00. It must not be confused with the standard OPPO Reno7 5G, Reno7 4G, Reno7 SE or other Reno7 family variants. Before installation, compare the BLP905 reference, technical model, voltage, flex cable shape, connector and contact position. Do not install the battery if any of these elements do not match.

Technical table