Battery BLP921 by OnePlus Ace PGKM10 OnePlus 10R 5G CPH2411 150W Endurance Edition 4500 mAh premium quality

BLP921 Battery for OnePlus Ace PGKM10 OnePlus 10R 5G CPH2411 150W Endurance Edition 4500 mAh premium quality

BLP921 battery for OnePlus Ace PGKM10 and OnePlus 10R 5G CPH2411 150W Endurance Edition in premium quality, designed to restore the autonomy, charging stability and power operation of the device. This replacement allows you to replace a degraded, swollen battery, with sudden shutdowns or with noticeable loss of duration. It incorporates Li Polymer technology, nominal capacity of 4500 mAh and internal dual cell structure, maintaining a suitable fit for professional installation. Designed for cold testing before closing the chassis.

Specifications

Internal replacement battery to restore the charging capacity and daily performance of the terminal. Nominal capacity of 4500 mAh with dual cell structure equivalent to 2250 mAh per cell. Working voltage of 7.74 V and approximate energy of 17.41 Wh. Li Polymer chemistry, suitable for devices with fast charging and electronic battery management. Compatible with OnePlus Ace PGKM10 and OnePlus 10R 5G CPH2411 in 150W Endurance Edition version.

Premium quality guarantees stable integration, good autonomy and reliable response during charging and discharging cycles. It is a solution aimed at workshops that need a safe replacement to recover the performance of the terminal without replacing other components. It helps correct common faults such as fast discharge, shutdowns with remaining percentage, restarts due to voltage drop or irregular charging. For correct assembly, it is always recommended to check the reference printed on the removed battery, review the connection flex and perform a charging test before sealing the device. Available for immediate shipping from Spain.

Installation tips

Disconnect the old battery before handling any internal connector. Use ESD protection and suitable tools to avoid damage to the board or flex. Remove the old adhesives and clean the mounting area before installing the new battery. Check that the flex fits without tension and without forcing the connector. Perform a power on, charging and discharging test before closing the chassis. Calibrate the battery after installation with a full charge cycle and normal use.

Notice

Before installing, always check the battery fitted in the terminal. Some OnePlus models may have regional variants or different internal references depending on the sales area. In OnePlus 10R 5G there are versions with different capacity and battery reference, so it must be checked especially if the terminal corresponds to the 150W Endurance Edition version. Always compare the reference printed on the original battery, the technical model of the device, the connection flex and the adhesive layout before removing seals or carrying out the final assembly.

Technical table