Oneplus Ace 5G spare parts

OnePlus Ace 5G Repuestos: Technical Characteristics and Replacement Instructions

Technical Characteristics of OnePlus Ace 5G Repuestos

The OnePlus Ace 5G is known for its robust performance and efficient hardware. Below are the technical characteristics of some key repuestos (replacement parts):

• Screen: 6.43 inches, Fluid AMOLED, 1080 x 2400 pixels
• Battery: 4500 mAh, non-removable, fast charging (65W)
• Camera: 50 MP (wide), 8 MP (ultrawide), 2 MP (macro)
• Processor: MediaTek Dimensity 8100-Max
• Storage and RAM: 128GB/8GB RAM, 256GB/12GB RAM

Instructions for Replacing OnePlus Ace 5G Repuestos

Replacing the Screen

• 1. Power off the OnePlus Ace 5G and remove the SIM card tray.
• 2. Use a heat gun or hairdryer to soften the adhesive around the edges of the back cover.
• 3. Carefully use a plastic pry tool to lift the back cover and remove it. Be gentle to avoid damaging the cover or internal components.
• 4. Disconnect the battery by carefully lifting the connector.
• 5. Disconnect the display connector located near the battery.
• 6. Remove the broken screen by gently applying heat to soften the adhesive and using a suction cup or plastic pry tool to lift the screen.
• 7. Clean any remaining adhesive from the frame and apply new adhesive strips.
• 8. Connect the new screen's display connector and reassemble the device in reverse order.

Replacing the Battery

• 1. Power off the OnePlus Ace 5G and remove the SIM card tray.
• 2. Use a heat gun or hairdryer to soften the adhesive around the edges of the back cover.
• 3. Carefully use a plastic pry tool to lift the back cover and remove it.
• 4. Disconnect the battery by lifting the connector carefully.
• 5. Remove the adhesive strips holding the battery in place.
• 6. Gently pry the battery out of its place.
• 7. Place the new battery into the slot, ensuring it aligns correctly.
• 8. Reconnect the battery connector and reassemble the device.

Replacing the Camera Module

• 1. Power off the OnePlus Ace 5G and remove the SIM card tray.
• 2. Use a heat gun or hairdryer to soften the adhesive around the edges of the back cover.
• 3. Carefully use a plastic pry tool to lift the back cover and remove it.
• 4. Disconnect the battery by carefully lifting the connector.
• 5. Locate the camera modules and disconnect their connectors.
• 6. Remove the screws securing the camera modules and gently lift them out of their slots.
• 7. Place the new camera modules into the slots and secure them with screws.
• 8. Reconnect the camera connectors and reassemble the device.

Always make sure to handle the internal components with care to avoid damage. If you are not confident in performing these replacements yourself, it is recommended to seek professional help.