Battery BLPA49 by OPPO A60 4G CPH2631 5000 mAh premium quality

BLPA49 Battery for OPPO A60 4G CPH2631 5000 mAh Premium Quality

BLPA49 battery for OPPO A60 4G CPH2631 in premium quality, designed to replace the internal battery when it shows loss of autonomy, rapid discharge, sudden percentage variations or unexpected shutdowns. This replacement part restores stable power delivery and suitable energy performance of the device. It has a capacity of 5000 mAh and a nominal voltage of 3.91 V. It is intended for professional installation and must always be compared with the reference printed on the removed battery before fitting.

Specifications

Battery reference BLPA49.

Capacity of 5000 mAh.

Nominal voltage of 3.91 V.

Rechargeable lithium-ion technology.

Compatible with OPPO A60 4G CPH2631.

Internal non-removable battery.

Compatible with the charging system of the device.

Premium quality provides stable energy delivery, suitable performance during charging cycles and a precise fit in the internal housing of the device. It is a workshop-oriented solution for repairing devices that show reduced autonomy, rapid discharge, restarts, shutdowns with remaining percentage or difficulties retaining charge.

Its construction facilitates precise installation, provided that the flex position, connector and electrical characteristics of the removed battery are respected. The BLPA49 reference corresponds to the OPPO A60 4G CPH2631 and must not be confused with other batteries used in devices with similar commercial names or in 5G variants.

Designed to reduce repeat repairs and optimise repair times. Available for immediate shipping from Spain.

Installation Advice

Switch off the device completely before starting the repair.

Disconnect the battery before handling other internal components.

Use suitable tools and electrostatic discharge protection.

Do not bend, puncture, compress or directly heat the battery.

Remove the old adhesives and carefully clean the mounting surface.

Check that the BLPA49 reference, connector and flex position match the removed battery.

Perform a power-on, charging and stability test before closing the device.

After installation, complete a controlled charging cycle to stabilise the percentage reading.

Warning

Before installation, always check the battery fitted in the device. Some OPPO models may have regional variants or different internal references depending on the market region. Always compare the reference printed on the original battery, the technical model of the device, the flex position, the connector and the electrical specifications.

Confirmed compatibility applies exclusively to the OPPO A60 4G CPH2631. It must not be confused with the OPPO A60 5G CPH2683, which may use a different battery reference, or with the BLPB49 battery intended for the OPPO Reno13 5G.

Technical Table