Battery BLPB95 7000mAh by Realme Neo 7 5G RMX5060 Neo 7 SE 5G RMX5080 premium quality

The BLPB95 7000 mAh battery for Realme Neo7 5G RMX5060 and Realme Neo7 SE 5G RMX5080 is a premium quality internal replacement designed to renew the power supply system of these phones. It uses lithium-ion technology, with a typical capacity of 7000 mAh, a rated capacity of 6850 mAh and a nominal voltage of 3.92 V. It allows replacement of a worn battery when reduced battery life, battery-related shutdowns or difficulties maintaining a charge occur. Its BLPB95 identification facilitates replacement selection for professional repairs.

- Compatible brand:Realme.

- Compatible models:Realme Neo7 5G and Realme Neo7 SE 5G.

- Compatible technical models:RMX5060 and RMX5080.

- Battery reference:BLPB95.

- Quality:Premium.

- Component type:rechargeable internal battery.

- Technology:lithium-ion (Li-ion).

- Typical capacity:7000 mAh.

- Rated capacity:6850 mAh.

- Nominal voltage:3.92 V.

- Typical energy:27.44 Wh.

- Connection system:internal connection to the device's power supply circuit.

- Installation:internal mounting in the phone's battery compartment.

The premium quality BLPB95 battery allows specific intervention on the battery of the Realme Neo7 and Neo7 SE, retaining the other components that continue to function correctly. The typical capacity of 7000 mAh and rated capacity of 6850 mAh provide two distinct values for identifying the replacement's energy configuration, while the 3.92 V rating allows its nominal voltage to be checked. Its rechargeable lithium-ion technology and internal mounting design meet the replacement requirements of these models. It is a useful component for workshops dealing with phones showing progressively reduced battery life or power supply problems associated with battery wear. The BLPB95 reference simplifies identification during repair.

- Completely turn off the device and use antistatic protection during the repair.

- Carefully remove the rear cover using suitable disassembly tools.

- Disconnect the battery from the motherboard before continuing with removal.

- Remove the installed battery using the corresponding removal points, avoiding deformation of the cell or damage to nearby components.

- Clean the battery compartment and remove previous adhesive residue.

- Apply suitable new fixing adhesives and correctly position the BLPB95 battery.

- Align the connector and establish the connection without forcing the flex cable or contacts.

- Check power-on, battery recognition and charging operation before final closure.

- Check the progression of the battery percentage during the first charging and usage cycles.

- Renew the rear cover adhesive and close the device by applying even pressure to achieve a proper fit.