Battery BLPC39 6000mAh by Realme P3 Ultra 5G RMX5030 premium quality

The BLPC39 6000 mAh battery for Realme P3 Ultra 5G RMX5030 and RMX5031, premium quality, is an internal replacement designed to replace the phone's battery when it shows reduced battery life, wear or power supply problems. It features lithium-ion polymer technology, with a typical capacity of 6000 mAh, a rated capacity of 5860 mAh and a nominal voltage of 3.92 V. Its BLPC39 reference allows identification of the battery corresponding to this model and enables a specific repair of the power supply system, facilitating device maintenance in specialized technical services.

- Compatible brand:Realme.

- Compatible model:Realme P3 Ultra 5G.

- Compatible technical models:RMX5030 and RMX5031.

- Battery reference:BLPC39.

- Quality:Premium.

- Component type:rechargeable internal battery.

- Technology:lithium-ion polymer (Li-ion Polymer).

- Typical capacity:6000 mAh.

- Rated capacity:5860 mAh.

- Nominal voltage:3.92 V.

- Typical energy:23.52 Wh.

- Connection system:internal connection to the device's power supply circuit.

- Installation:internal mounting in the phone's battery compartment.

The premium quality BLPC39 battery allows the energy storage system of the Realme P3 Ultra 5G to be renewed by replacing the deteriorated battery. Its typical capacity of 6000 mAh and nominal voltage of 3.92 V correspond to the electrical configuration of this reference, facilitating selection of the appropriate replacement. Lithium-ion polymer technology provides a rechargeable solution for restoring device power when the installed battery has lost capacity. Its internal format is designed for the phone's battery compartment and allows a localized repair while retaining the other functional components. It is particularly useful for specialized workshops carrying out repairs due to reduced battery life, charging problems or battery wear, offering a premium quality alternative to extend the service life of the phone.

- Completely turn off the Realme P3 Ultra 5G and use antistatic protection during the repair.

- Carefully remove the rear cover using suitable disassembly tools.

- Disconnect the battery from the motherboard before continuing with removal.

- Remove the installed battery, avoiding deformation of the cell or damage to nearby components.

- Clean the battery compartment and remove previous adhesive residue.

- Apply suitable new fixing adhesives and correctly position the BLPC39 battery.

- Align the connector and establish the connection without forcing the flex cable or contacts.

- Check power-on, battery recognition and charging operation before final closure.

- Check the progression of the battery percentage during the first charging and usage cycles.

- Renew the rear cover adhesive and close the device by applying even pressure to achieve a proper fit.