Battery HQ-7160SA 5000mAh by Samsung Galaxy A07 4G A075 GH81-28106A Service Pack

HQ-7160SA 5000mAh Battery for Samsung Galaxy A07 4G A075 GH81-28106A Service Pack

HQ-7160SA battery for Samsung Galaxy A07 4G A075 in Service Pack quality, designed to restore the autonomy, charging stability and energy performance of the device. This spare part is suitable for professional replacements when the battery shows wear, unexpected shutdowns, fast discharge, irregular charging cycles, internal swelling or loss of stability during daily use. Its 5000mAh capacity and reference GH81-28106A allow stable electrical behavior to be maintained, respecting the specifications of the device. It is a suitable part for repair shops that need a reliable spare part, with direct compatibility and correct fit in the internal structure of the Samsung Galaxy A07 4G.

Specifications

• Battery: 5000mAh
• Compatibilities: Samsung Galaxy A07 4G
• Technical models: SM-A075F, SM-A075F/DS, SM-A075W, SM-A075U, SM-A075S
• Part No: HQ-7160SA, GH81-28106A
• Quality: Service Pack

Service Pack quality guarantees stable connection, precise fit and suitable performance for professional repairs. This battery allows restoring the device usage time, improving stability during charging and reducing issues related to sudden shutdowns, accelerated discharge or irregular behavior of the power system. For correct assembly, it is recommended to check the reference printed on the removed battery before installation, especially in devices with different regional variants. Before final chassis closure, it is advisable to perform power-on, charging, discharging, temperature and system recognition tests. Available for immediate shipping from Spain.

Installation tips

Disconnect the old battery before handling any internal connector.

Use ESD protection throughout the repair.

Remove old adhesives and correctly clean the support area.

Do not bend, pierce or press the battery during installation.

Check power-on, charging, discharging and temperature before closure.

Verify the reference of the removed battery before final assembly.

Perform an initial calibration with a full charge after replacement.

Technical table