Battery HQ-7160SA 5000mAh by Samsung Galaxy A07 4G A075 premium quality

HQ-7160SA 5000mAh battery for Samsung Galaxy A07 4G A075 premium quality

HQ-7160SA 5000mAh battery for Samsung Galaxy A07 4G A075 in premium quality, designed to restore the autonomy, charging stability and energy performance of the device. This spare part allows replacement of a degraded, swollen battery, with fast discharge, unexpected shutdowns or capacity loss after prolonged usage cycles. Its specific format maintains the correct internal fitting inside the device and allows a secure connection with the board. Compatible with Samsung Galaxy A07 4G and technical variants SM-A075F, SM-A075F/DS, SM-A075W, SM-A075U and SM-A075S. Intended for professional installation with previous charging, discharging and calibration test before the final closure of the chassis.

Specifications

HQ-7160SA battery for Samsung Galaxy A07 4G.

Compatible with technical models SM-A075F, SM-A075F/DS, SM-A075W, SM-A075U and SM-A075S.

5000mAh capacity.

Nominal voltage 3.88V.

Part No GH81-28106A or equivalent.

Premium quality spare part prepared for professional installation.

Premium quality offers a reliable solution for repairs where autonomy and stability need to be restored without replacing other device components. This HQ-7160SA battery allows correction of common issues such as irregular consumption, restarts, sudden percentage drop or constant charging need when wear is located in the battery. Its specific design makes assembly easier in the Samsung Galaxy A07 4G A075, maintaining good internal holding and stable contact with the board connector. It is a suitable spare part for workshops that need a battery with good capacity, stable performance and reliable behavior after installation, always performing previous tests before closing the device.

Installation tips

Disconnect the device before starting the repair.

Use ESD protection throughout the intervention.

Remove the old battery without puncturing or bending it.

Remove adhesive residue before installing the new battery.

Check the connector before final fixing.

Perform a charging test before closure.

Calibrate the battery after installation with a full charge and discharge cycle.

Technical table