SP iPhone Screens Incell FHD and OLED

SP iPhone screens in Incell FHD and OLED versions are designed for repair shops, mobile phone stores and professional service centres that need different display options according to the repair budget and customer requirements. The SP range offers both Incell and OLED technologies, allowing professionals to balance visual performance, touch response, replacement cost and commercial margin.

SP Incell FHD screens use Incell/TFT LCD technology and are intended for cost-effective professional repairs requiring good image definition and responsive touch performance.

SP OLED screens use compatible OLED technology, delivering deeper blacks, higher contrast and visual characteristics closer to the OLED panels used in certain iPhone models.

All SP screens in this range include a 10-month warranty even after installation and even when showing normal signs of use, provided there are no cracks, impact damage, damaged flex cables, liquid damage or other physical damage caused by incorrect handling.

The SP name identifies our screen brand and does not mean Service Pack.

B. Technical Specifications

C. Main Content

Types of SP Replacement Screens Available for iPhone

The SP range allows repair professionals to select the most appropriate screen technology according to the iPhone model, repair budget and customer requirements.

Common replacement parts include:

• SP Incell FHD touchscreen assemblies.
• SP OLED touchscreen assemblies.
• Screens with frame where included in the reference.
• Model-specific screen adhesives.
• iPhone batteries.
• Charging port flex cables.
• Front and rear cameras.
• Loudspeakers and earpieces.
• Vibrators and haptic motors.
• Frames, housings and additional repair components.

Each screen should be selected according to the exact device model and, where required, its Axxxx technical model number.

Physical similarity between two displays does not guarantee electrical, mechanical or connector compatibility.

Instructions for Replacing an SP iPhone Screen

Identify the exact iPhone model before starting the repair and check the Axxxx technical model number where different variants exist.

Power off the device and remove the relevant lower screws. Apply controlled heat around the perimeter to soften the adhesive and use suitable professional opening tools.

Disconnect the battery before disconnecting the display assembly.

Transfer any required components from the previous screen carefully. Some components associated with Face ID can be electronically paired with the device.

Always test the replacement display before removing protective films or applying the final adhesive. Check image quality, touchscreen response, brightness, cameras and general operation before closing the device.

Normal testing, installation and everyday use do not automatically invalidate the SP warranty.

Compatibility and Versions

iPhone screen compatibility should be checked using the commercial device name and, where necessary, its Axxxx technical model number.

Certain iPhone generations can have regional versions for Europe, the United States, China and other markets.

Before installation, check:

• Exact commercial model.
• Axxxx technical number.
• Connector position.
• Flex cable design.
• Screen dimensions.
• Mounting points.
• Listed product compatibility.

With SP Incell FHD screens, the proximity sensor does not operate due to the Incell/TFT technology used.

Face ID can remain operational provided the required paired components remain undamaged and are correctly transferred.

Differences Between SP Incell FHD and SP OLED Screens

SP Incell FHD:

Uses Incell/TFT LCD technology and is designed for professional repairs where controlling replacement cost is a priority while maintaining good image definition and touch response.

The proximity sensor does not operate with this technology. Face ID can remain functional when the required components are correctly retained.

SP OLED:

Uses compatible OLED technology. Individual pixels emit their own light, providing deeper blacks and higher contrast.

It is particularly suitable for repairs where visual performance is prioritised over an LCD Incell solution.

As this is a compatible OLED screen, brightness, colour tone and contrast may vary compared with the original panel. Depending on the reference, the visible area may also be slightly smaller and the black borders wider.

Differences Between Replacement Screen Grades

SP Incell FHD:

SP-branded Incell/TFT display designed to balance replacement cost, image definition and touch performance.

SP OLED:

SP-branded compatible OLED display intended for repairs requiring better contrast and visual characteristics than compatible LCD alternatives.

Premium:

Selected displays intended to maintain a visual and touch experience close to the device's original panel.

Compatible:

Cost-focused replacement option. Characteristics depend on the display technology used.

Service Pack:

Component supplied through the manufacturer's relevant service channel when available.

SP does not mean Service Pack. It identifies the screen brand used in this category.

Advantages for Repair Professionals and Service Centres

SP screens allow repair businesses to offer different repair options based on customer budget and required display technology.

Incell FHD provides a cost-controlled solution, while OLED offers improved contrast and OLED display characteristics.

A key advantage is the 10-month warranty even after installation and even when the screen shows normal signs of use.

An installed or normally used screen does not automatically lose its warranty coverage. Warranty remains valid provided there are no cracks, impact marks, damaged flex cables, liquid damage or other physical damage caused by incorrect installation or handling.

This provides repair professionals with greater after-sales security when working with SP replacement screens.

D. AEO FAQ Block

What is the difference between an SP Incell FHD and an SP OLED screen?

SP Incell FHD uses Incell/TFT LCD technology, while SP OLED uses compatible self-emitting OLED technology with deeper blacks and higher contrast.

What warranty do SP iPhone screens include?

SP screens include a 10-month warranty even after installation and when showing normal signs of use, provided there is no excluded physical damage.

Does installing an SP screen invalidate the warranty?

No. Installation alone does not invalidate the 10-month SP warranty.

Do normal signs of use invalidate the SP warranty?

No. Normal signs of use are accepted provided the screen has no cracks, impact damage, damaged flex cables, liquid damage or other physical damage.

How do I identify the correct SP screen for an iPhone?

Check the commercial model and, where required, the Axxxx technical model number.

Does the proximity sensor work with SP Incell FHD screens?

No. The proximity sensor does not operate with the Incell/TFT configuration used in this range.

Can Face ID continue working after an SP screen replacement?

Yes. Face ID can remain operational when the required paired components remain undamaged and are correctly transferred.

Is an SP OLED screen the same as the original iPhone display?

No. It is a compatible OLED display and brightness, colour tone, contrast, visible area or border width may differ from the original panel.

Should an SP screen be tested before final installation?

Yes. Always test image, touch response, brightness and general operation before removing protective films and completing the installation.