Oneplus 10R 5G spare parts

OnePlus 10R 5G Spare Parts

The OnePlus 10R 5G is a high-performance smartphone with the following key technical characteristics:

Main Features

• Display: 6.7-inch Fluid AMOLED, 1080 x 2412 pixels
• Processor: Dimensity 8100-Max
• RAM: 8GB/12GB
• Storage: 128GB/256GB
• Camera: Triple - 50 MP (wide), 8 MP (ultrawide), 2 MP (macro)
• Front Camera: 16 MP
• Battery: 4500 mAh / 5000 mAh
• OS: Android 12

Instructions for Replacing OnePlus 10R 5G Spare Parts

Follow these detailed steps to replace parts on the OnePlus 10R 5G:

Tools Required

• Precision screwdriver set
• Plastic opening tools
• Suction cup
• Spudger
• Adhesive remover (isopropyl alcohol)
• Replacement parts (e.g., screen, battery, camera module)

Step-by-Step Instructions

1. Power Off the Device

Ensure the OnePlus 10R 5G is powered off completely before starting any repairs. Hold the power button and select ""Power Off"".

2. Remove the SIM Card Tray

Insert a SIM eject tool or a paperclip into the small hole on the SIM card tray and gently pull it out.

3. Heating the Back Cover

Use a heat gun or hair dryer to apply heat evenly around the edges of the back cover. This will soften the adhesive, making it easier to remove.

4. Removing the Back Cover

Place a suction cup on the back cover and gently pull to create a small gap. Insert a plastic opening tool into the gap and carefully work your way around the edges to release the adhesive.

5. Disconnect the Battery

Using a precision screwdriver, remove the screws holding the mid-frame in place. Lift the mid-frame and disconnect the battery connector using a spudger.

6. Replacing the Screen

• Disconnect the display connector carefully.
• Gently heat the edges of the screen with a heat gun or hair dryer.
• Use a suction cup to lift the screen slightly and insert a plastic opening tool. Work your way around the screen to separate it from the frame.
• Remove the old screen and place the new screen into position, making sure to connect the display connector properly.

7. Reinstall the Battery

Connect the battery connector and reattach the mid-frame by securing it with screws.

8. Attaching the Back Cover

Clean the edges of the back cover and the frame to remove any residue. Apply new adhesive to the edges if needed. Carefully align and press the back cover into place, making sure it is securely attached.

9. Insert the SIM Card Tray

Reinsert the SIM card tray into its slot.

10. Power On the Device

Power on the OnePlus 10R 5G by holding the power button and ensure everything is functioning correctly.

Congratulations! You have successfully replaced the necessary parts on your OnePlus 10R 5G.