Oppo Reno 4 CPH2113 spare parts

Technical Characteristics of Oppo Reno 4 Replacement Parts

The Oppo Reno 4 is a popular smartphone with a sleek design and advanced features. Below are the technical characteristics of some of the most commonly replaced parts (repuestos) for the Oppo Reno 4:

Screen Replacement

• Type: AMOLED capacitive touchscreen, 16M colors
• Size: 6.4 inches
• Resolution: 1080 x 2400 pixels
• Protection: Corning Gorilla Glass 5

Battery

• Type: Li-Po 4015 mAh, non-removable
• Fast Charging: 65W, 60% in 15 min (advertised)
• Model: BLP763

Back Cover

• Material: Glass and Aluminum frame
• Weight: Approximately 165g
• Colors: Space Black, Galactic Blue

Instructions on How to Replace Oppo Reno 4 Replacement Parts

Screen Replacement Instructions

1. Power off the device and remove the SIM card tray.

2. Use a heat gun or hairdryer to soften the adhesive around the edges of the back cover. Carefully use a suction cup and a plastic tool to lift the back cover.

3. Unscrew the screws securing the internal protective covers and detach the battery connector and screen connectors.

4. Use a plastic tool to carefully pry out the damaged screen without breaking it further.

5. Clean any residual adhesive from the frame and apply new adhesive strips around the edges.

6. Place the new screen into position and connect the screen connectors and battery connector. Secure with screws.

7. Gently press the back cover back into place and ensure it is sealed properly.

8. Power on the device and test the new screen for functionality.

Battery Replacement Instructions

1. Power off the device and remove the SIM card tray.

2. Use a heat gun or hairdryer to soften the adhesive around the edges of the back cover. Carefully use a suction cup and a plastic tool to lift the back cover.

3. Unscrew the screws securing the protective covers to access the battery connector.

4. Disconnect the battery connector to ensure there is no power running through the device.

5. Use a plastic card or tool to slowly lift the battery from its adhesive. Be careful not to puncture or damage the battery.

6. Carefully remove the old battery from the device.

7. Place the new battery into position, making sure it aligns correctly with the connectors.

8. Reconnect the battery connector and resecure the internal protective covers with screws.

9. Gently press the back cover back into place and ensure it is sealed properly.

10. Power on the device and test the new battery to ensure it functions correctly.

Back Cover Replacement Instructions

1. Power off the device and remove the SIM card tray.

2. Use a heat gun or hairdryer to soften the adhesive around the edges of the back cover. Carefully use a suction cup and a plastic tool to lift the back cover without cracking it.

3. If necessary, remove any internal components attached to the back cover, such as NFC coils.

4. Apply new adhesive strips around the edges of the frame.

5. Place the new back cover into position, pressing down gently to ensure it sticks firmly to the adhesive.

6. Reattach any internal components if applicable.

7. Insert the SIM card tray back into its slot.

8. Power on the device to ensure that the back cover is securely attached and the device operates correctly.