Display by Oneplus 13R 5G with black touch screen compatible TFT

Black Screen and Touch Digitizer for OnePlus 13R 5G CPH2645 CPH2647 CPH2691 Compatible TFT

Black screen and touch digitizer module for OnePlus 13R 5G CPH2645, CPH2647 and CPH2691 in compatible TFT quality, designed to replace a broken display, a screen with no image, lines, spots or touch response faults. The assembly integrates the LCD panel and touch digitizer to facilitate installation without carrying out lamination processes.

The OnePlus 13R is factory-fitted with a 6.78-inch AMOLED ProXDR display, a resolution of 2780 by 1264 pixels and a refresh rate of up to 120 Hz. This replacement uses compatible TFT technology, so its visual performance differs from the factory-installed panel.

Specifications

Complete screen with integrated touch digitizer.

Compatible with OnePlus 13R 5G.

Compatible technical models CPH2645, CPH2647 and CPH2691.

Black front colour.

Compatible TFT LCD technology.

Approximate size of 6.78 inches.

Supplied without frame.

Compatible TFT quality offers an economical solution to restore the image and touch control of the device. It provides sufficient display performance for calls, messaging, browsing, applications and multimedia playback, although it has differences compared with the factory-fitted AMOLED display.

Due to its TFT construction, the module may show lower brightness, contrast and colour depth. It may also have slightly wider visible borders, greater thickness and a less uniform image. It is intended for economical repairs where restoring device functionality and maintaining a good balance between cost and performance are prioritised.

Before installation, the flex cables, connectors and module contour must be compared with the removed screen. A complete test should be performed without removing films or adhesives.

Available for immediate shipping from Spain.

Installation Tips

Disconnect the battery and use ESD protection.

Test the screen before removing films or adhesives.

Check the image and touch response across the entire surface.

Align the connectors without bending or forcing the flex cables.

Completely clean the previous adhesive residue.

Use specific adhesive for screens.

Check the cameras, earpiece and sensors before closing.

Apply uniform pressure during sealing.

Notice

This compatible TFT screen does not allow the fingerprint reader located under the screen or the proximity sensor integrated into the original assembly to be used. The image is inferior to the factory-installed AMOLED display and may show lower brightness, contrast and definition, as well as slightly thicker borders and greater module thickness.

Check all functions before permanently installing the screen. Returns will not be accepted once the protective films have been removed, adhesives have been applied or the replacement part has been installed.

Technical Table