Display by Oneplus 13R 5G with black touch screen with black frame compatible TFT

Compatible TFT Screen with Black Frame for OnePlus 13R 5G CPH2645 CPH2691

Screen for OnePlus 13R 5G, technical models CPH2645 and CPH2691, with touch panel and preassembled black frame. This compatible TFT replacement part is designed to replace a broken display, a screen without an image, or one with spots, lines or touch response faults. The integrated frame facilitates alignment and reduces the work required during assembly. The OnePlus 13R uses a 6.78 inch screen with 1.5K resolution and a refresh rate of up to 120 Hz, although this compatible TFT version provides different performance compared with the factory installed panel.

Compatible TFT quality provides an economical alternative for replacing the screen of the OnePlus 13R 5G when functionality and repair cost are prioritised. It offers sufficient display quality for everyday use and stable touch response, although brightness, contrast, colour reproduction and viewing angles are lower than those of an AMOLED screen. The panel may have greater thickness, wider visible borders and a slightly different image area. The preassembled black frame facilitates assembly, helps maintain correct alignment with the chassis and reduces workshop repair times. Available for immediate shipment from Spain.

Installation Advice

Disconnect the battery before handling the screen connectors.

Perform a cold test before removing protectors or adhesives.

Check the image and touch response across the entire surface.

Align the connectors without bending or forcing the flex cables.

Check the operation of the cameras, buttons and sensors before closing.

Completely remove the remains of the previous adhesive.

Use new specific adhesive and apply uniform pressure during sealing.

Notice

This compatible TFT screen does not allow the use of the fingerprint reader integrated under the screen or the original proximity sensor. Image quality is lower than that of an AMOLED screen, with reduced brightness, contrast and colour accuracy. The assembly may have greater thickness, wider black borders and a slightly smaller visible surface. These characteristics correspond to compatible TFT technology and do not constitute a manufacturing defect.

Technical Table