Power and fingerprint flex gray by iPad Air 11 2024 iPad Air 11 2025 iPad Air 13 2024 iPad Air 13 2025 premium

Space Gray Power and Fingerprint Sensor Flex for iPad Air 11 2024 A2902 A2903 A2904 iPad Air 11 2025 A3266 A3267 A3270 iPad Air 11 2026 A3459 A3460 A3463 iPad Air 13 2024 A2898 A2899 A2900 iPad Air 13 2025 A3268 A3269 A3271 iPad Air 13 2026 A3461 A3462 A3464 Premium Quality

Power button and fingerprint sensor flex for Apple iPad Air 11 2024 M2, iPad Air 11 2025 M3, iPad Air 11 2026 M4, iPad Air 13 2024 M2, iPad Air 13 2025 M3 and iPad Air 13 2026 M4 in premium quality and Space Gray finish. This replacement integrates the top button and Touch ID sensor into a single flexible assembly, designed to restore power, lock and sensor reading functions when the installed module has physical faults. Compatible with the Wi-Fi and Cellular variants indicated in the technical table. Designed for professional installation and cold testing before closing.

Specifications

Component: power button flex with integrated fingerprint sensor.

Function: power on, power off, lock, wake and Touch ID reading.

Location: top button of the device.

Connection: flex with specific FPC connector.

Color: Space Gray.

Compatibility: 11 and 13 inch iPad Air models with M2, M3 and M4 processors corresponding to the indicated 2024, 2025 and 2026 generations.

Premium quality provides precise fitting, stable button travel and correct electrical continuity for a professional repair. Its format maintains the fixing points and geometry required to facilitate assembly inside the chassis without structural modifications. It is a suitable solution for replacing modules with irregular button response, flex damage or problems associated with the top button. Touch ID functionality depends on the correct installation and pairing of the sensor with the device, so it should be checked before final closure. Designed to reduce repeat repairs and optimize repair times. Available for immediate shipment from Spain.

Installation Tips

Disconnect the battery before handling the flex or motherboard.

Use ESD protection throughout the repair.

Remove the installed assembly without bending or puncturing the flex.

Align the FPC connector and top button without applying excessive pressure.

Perform a cold test before closing the device.

Check power, lock and Touch ID sensor operation.

Replace the necessary adhesives and close the device only after verifying all functions.

Technical Table