Power and fingerprint grey by iPad Air 11 2024 iPad Air 11 2025 iPad Air 13 2024 iPad Air 13 2025 compatible

grey power and fingerprint sensor flex for iPad Air 11 2024 iPad Air 11 2025 iPad Air 13 2024 iPad Air 13 2025 (technical models A2902 A2903 A2904 A2898 A2899 A2900 A3266 A3267 A3268 A3270 A3271 A3272) compatible quality

Replacement flex cable with integrated power button and fingerprint sensor for iPad Air 11 inch 2024 and 2025, as well as iPad Air 13 inch 2024 and 2025. Compatible with technical models A2902, A2903, A2904, A2898, A2899, A2900 for 2024 versions and A3266, A3267, A3268, A3270, A3271, A3272 for 2025 versions. This module integrates the side power switch and Touch ID sensor, restoring biometric unlocking and power functionality when there are press failures, intermittent reading or liquid damage. Designed for professional installation, it maintains the original FPC layout and specific chassis format in grey color.

Key Features

• Component: Power button flex with integrated fingerprint sensor
• Color: grey
• Function: Power on, lock and Touch ID reading
• Location: Upper side of the device
• Connection type: Specific FPC for iPad Air 2024 2025
• Compatibility: iPad Air 11 and 13 inch 2024 and 2025
• Direct replacement without structural modifications

Compatible quality provides a functional solution to restore power and biometric reading when the original flex shows cuts, switch failure or sensor malfunction. It maintains adequate tolerances for proper side frame assembly and precise external button alignment. Intended for technicians requiring an effective and stable repair, restoring Touch ID operation as long as the motherboard and system configuration have no additional pairing restrictions. Suitable for repairs due to wear, side impact or corrosion.

Installation Tips

1. Disconnect the battery before handling any internal flex.

2. Use antistatic tools and ESD-safe surface.

3. Remove the module carefully to avoid damaging surrounding adhesive.

4. Check the motherboard FPC connector condition before installation.

5. Test power and fingerprint reading before full reassembly.

6. Ensure correct alignment of the external button during installation.

Notice

On Apple devices, the fingerprint sensor may require pairing with the motherboard. If the device does not recognize the new sensor, Touch ID functionality may not be available, while power and lock functions remain operational.

Technical Table

Brand | Compatible Models | Technical Model | Part Number | Component Type | Dimensions | Capacity/Voltage | Quality
Apple | iPad Air 11 2024 / iPad Air 11 2025 / iPad Air 13 2024 / iPad Air 13 2025 | A2902 / A2903 / A2904 / A2898 / A2899 / A2900 / A3266 / A3267 / A3268 / A3270 / A3271 / A3272 | — | Power + fingerprint flex | Model specific | — | Compatible