USB flex by Cubot KingKong 11 premium quality

USB Flex Cable for Cubot KingKong 11 Premium Quality

USB flex module for Cubot KingKong 11 designed to restore charging and data transfer functions when the device shows connection failure, intermittent charging, disconnection when moving the cable or inability to sync with a computer. This premium quality spare part integrates the USB connector with its flexible circuit and contact points ready for direct installation onto the motherboard, respecting the reinforced internal chassis structure of the KingKong series.

Professional repair solution recommended after port wear due to heavy use, dust intrusion, moisture or mechanical damage to the original connector.

Key Features

• Component type: USB flex / Charging port
• Function: Battery charging and data transfer
• Location: Lower device module
• Connection: FPC to motherboard
• Compatibility: Cubot KingKong 11
• Quality: Premium

Premium quality ensures stable electrical contact, proper port alignment with the chassis and reliable data transmission without loss. The design respects original tolerances to guarantee firm fit and prevent movement that may cause intermittent faults. Recommended spare part for technicians seeking reliable repair while minimizing post-repair issues related to poor connection or unstable charging.

Installation Tips

1. Power off the device and disconnect the battery before repair.

2. Remove the lower module using proper tools.

3. Clean contact areas before installing the new flex.

4. Verify correct alignment of the port with the chassis opening.

5. Test charging and data transfer before final closure.

Technical Table

Brand | Compatible Models | Technical Model | Part Number | Component Type | Dimensions | Capacity/Voltage | Quality
Cubot | Cubot KingKong 11 | | — | USB Flex | — | — | Premium