iFlying 2D Precision Screwdriver Kit (Qianli)

QianLi iFlying 2D Precision Screwdriver Kit Phillips 1.2 mm Tri Point Y0.6 Pentalobe 0.8 mm Convex Phillips 2.5 mm Torx T2

QianLi iFlying 2D precision screwdriver kit consisting of five specific tools for disassembly and repair work on mobile phones, tablets and small electronic devices. Includes Phillips 1.2 mm, Tri Point Y0.6, Pentalobe 0.8 mm, Convex Phillips 2.5 mm and Torx T2 profiles. The handles are made of aluminum alloy with a non slip surface, while the tips use high strength S2 steel. Its design is intended to provide a precise fit on small screws and facilitate continuous work in technical services.

Specifications

Brand: QianLi

Series: iFlying 2D

Quantity: 5 screwdrivers

Type A: Phillips 1.2 mm

Type B: Tri Point Y0.6

Type C: Pentalobe 0.8 mm

Type D: Convex Phillips 2.5 mm

Type E: Torx T2

Tip material: S2 steel

Handle material: aluminum alloy

Magnetic tips

Smooth rotating upper bearing

Handle with non slip texture

Dimensions of each screwdriver: approximately 124 x 18 mm

Color: dark grey

QianLi equips the iFlying 2D series with magnetic tips and an internal neodymium magnet system designed to maintain good screw retention capacity during work. The upper section incorporates a rotating support with bearing that allows axial pressure to be maintained while turning the screwdriver, facilitating control over small screws and reducing the risk of slipping. The textured handle improves grip during prolonged repairs and the differentiated identification of the five profiles allows the required tool to be quickly located. The set is especially intended for technicians who regularly work with smartphones and precision electronic devices.

Installation Tips

Always select the profile corresponding to the screw before starting.

Check that the tip is fully seated in the screw head.

Maintain moderate axial pressure while turning.

Do not use an approximate size screwdriver if the profile does not fit correctly.

Avoid using these tools as levers or opening tools.

Keep the tips clean and free of adhesive, flux or residue.

Store the screwdrivers in a dry place after use.

Warning

Using an incorrect tip or applying excessive torque can deform the screw head and make subsequent removal difficult. These tools are intended for precision work and should not be used as levers, punches or cutting tools.

Technical Table