CJ-3 Glue Remover Tool 1800mAh (MaAnt)

MaAnt CJ-3 1800mAh Adhesive Removal Tool

MaAnt CJ-3 electric tool designed to remove adhesives during professional screen repair and refurbishment work. It is especially suitable for removing OCA adhesive residue, hardened glues and residues present during display separation and cleaning processes. It integrates a motor with four adjustable speed levels, rotation in both directions and a rechargeable 1800mAh battery. Its compact format facilitates precision work on flat and curved screens, allowing the speed and direction of rotation to be adapted to the characteristics of the adhesive being treated.

Specifications

Model: MaAnt CJ-3

Battery capacity: 1800mAh

Power: 5W

Power input: 5V 1A

Operating range: 2.8V to 3.7V

Idle current: 0.2A

Locked rotor current: 1.4A

Charging: USB Type C

Speeds: 4 adjustable levels

Rotation: both directions

Automatic standby: after approximately 30 seconds without activity

Dimensions: 147 x 34 x 34 mm

Net weight: 217 g

The MaAnt CJ-3 combines a stable operating motor with four selectable speeds to adapt the tool to adhesives of different hardness. The possibility of reversing the direction of rotation makes it easier to work from different positions and improves control during residue removal. It also incorporates green LED lighting designed to facilitate the visualization of adhesive residue and small irregularities on the work surface. The 1800mAh battery allows operation without permanent connection and the USB Type C port makes it possible to use the tool while connected to the power supply. Its compact design is intended for repair workshops and screen refurbishment work.

Installation Tips

Select a low speed during the first passes.

Do not apply excessive pressure to the screen surface.

Keep the tool moving while removing the adhesive.

Use the direction of rotation that provides greater control depending on the working position.

Progressively remove the released residue.

Check that the accessory being used is correctly secured before starting.

Use ESD protection when working near electronic components.

Warning

Tool intended for technical screen repair and refurbishment work. Excessive pressure, an unsuitable speed or incorrect handling may damage the panel or its different layers. It is recommended for use only with previous knowledge of adhesive removal and screen refurbishment.

Technical Table