Blackview

Technical Characteristics of Blackview

The Blackview smartphone is known for its ruggedness. It is typically equipped with high-quality features making it reliable for a variety of conditions. Below outlines some of its key technical specifications:

• Display Type: HD+ IPS
• Screen Size: 6.5 inches
• Operating System: Android 10.0
• Chipset: Octa-core Processor
• Internal Memory: 32GB expandable via Micro SD Card
• RAM: 4GB
• Main Camera: Dual-lens camera with LED flash
• Front Camera: High-resolution Selfie Camera
• Battery: Non-removable Li-Po Battery

Instructions on How to replace Blackview

Tools Needed

Below are tools necessary to replace your Blackview smartphone:

• Screwdrivers - These will be needed to remove screws during the process.
• Spudger or Plastic Opening Tools - These are used to pry open parts without causing damage.
• Tweezers - For handling smaller parts.

Replacement Steps

Follow the steps below to replace your Blackview smartphone:

1. Turn the device off and remove the Sim Card tray.
2. Using a heat gun, heat the edges of the back cover to soften the adhesive. Be sure not to heat any area for too long, too much heat can damage the device internally.
3. Insert a plastic opening tool or spudger between the back cover and frame of the phone. Slide it around the edges to break the adhesive seal.
4. Remove the back cover gently.
5. Unscrew the visible screws securing the mainboard cover with the screwdriver. Then remove the cover.
6. Disconnect the battery connector from the motherboard.
7. Locate and disconnect the screen connector.
8. Remove any other connectors and screws holding the motherboard in place, and then remove the motherboard.
9. Now, you can replace any parts required. To reassemble, follow these steps in reverse, applying new adhesive where necessary.