Oneplus

Technical Characteristics of OnePlus Nord AC2001/AC2003 Repuestos

The OnePlus Nord AC2001 and AC2003 are renowned for their sleek design, high performance, and durability. Below are the essential technical characteristics of the main repuestos (replacement parts) for these models:

Display

• Size: 6.44 inches
• Type: Fluid AMOLED, 90Hz
• Resolution: 1080 x 2400 pixels, 20:9 ratio (~408 ppi density)
• Glass: Corning Gorilla Glass 5

Battery

• Type: Li-Po 4115mAh, non-removable
• Charging: Fast charging 30W, 70% in 30 min (advertised)

Camera

• Main Camera: Quad setup - 48 MP (wide), 8 MP (ultrawide), 5 MP (depth), 2 MP (macro)
• Front Camera: Dual setup - 32 MP (wide), 8 MP (ultrawide)

Processor

• Chipset: Qualcomm SDM765 Snapdragon 765G (7 nm)
• CPU: Octa-core (1x2.4 GHz Kryo 475 Prime & 1x2.2 GHz Kryo 475 Gold & 6x1.8 GHz Kryo 475 Silver)
• GPU: Adreno 620

Memory

• Internal Storage: 64GB, 128GB, 256GB
• RAM: 6GB, 8GB, 12GB

Instructions on How to Replace OnePlus Nord AC2001/AC2003 Repuestos

Tools Needed

• Plastic Opening Tools
• Phillips #00 Screwdriver
• Suction Handle
• Spudger
• SIM Eject Tool
• Replacement Part (e.g., Battery, Display, Camera)

Steps to Replace the Battery

• Step 1: Power off the phone and remove the SIM card tray using the SIM eject tool.
• Step 2: Use a suction handle to lift the back cover slightly. Carefully insert a plastic opening tool to release the clips around the edges.
• Step 3: Remove the screws securing the battery connector cover with a Phillips #00 screwdriver.
• Step 4: Disconnect the battery connector using a spudger.
• Step 5: Use the pull tab to gently lift and remove the battery from the device.
• Step 6: Insert the new battery, reconnect the battery connector, and secure the connector cover with screws.
• Step 7: Snap the back cover into place and reinsert the SIM card tray.
• Step 8: Power on the phone to ensure the new battery is functioning correctly.

Steps to Replace the Display

• Step 1: Follow Steps 1-3 from the battery replacement instruction to remove the back cover.
• Step 2: Disconnect the display connector using a spudger.
• Step 3: Carefully heat the edges of the front screen to soften the adhesive using a heat gun or hairdryer.
• Step 4: Use a suction handle to lift the display slightly. Insert a plastic opening tool and slide it around the edges to release the adhesive.
• Step 5: Remove the old display and clean any remaining adhesive from the frame.
• Step 6: Apply adhesive to the edges and carefully align the new display onto the frame.
• Step 7: Reconnect the display connector and secure any screws if necessary.
• Step 8: Snap the back cover into place, reinsert the SIM card tray, and power on the phone to test the new display.

Following these detailed steps will help ensure the proper replacement of the OnePlus Nord AC2001/AC2003 repuestos. Always handle parts with care and ensure all connectors are properly seated to avoid damage.